Invacare Force Manuale Utente Scaricare il pdf (Pagina 37)

SECTION 6—RIDING POSITION

Part No 1114850 37 Recumbent Handcycle Series

Adjusting Seat Fore/Aft - XLT Gold and Top End Force

Only

NOTE:Forthisprocedure,refertoFIGURE 6.7.

NOTE:Seatshouldbeadjustedsothatwhenseatedwithfeetinthefootrests,thereisaslightbend

atthekneeandaslightbendattheelbowwhenthehandpedalisfurthestaway.

1. Removetheseatupholstery.RefertoReplacingSeatUpholsteryonpage 58.

2. Loosen,butDONOTremovethetwomountingboltsandlocknutssecuringthetwo

backclampstotheseatrails.

3. Slidebackclampsfor(forward)oraft(rearward)alongtheseatrailstodesiredseat

position.

4. Securelytightenthetwomountingboltsandlocknutssecuringthetwobackclamps

totheseatrails.

5. Reinstalltheseatupholstery.RefertoReplacingSeatUpholsteryonpage 58.

6. Ifnecessaryadjustthebackangle.

FIGURE 6.7 Adjusting Seat Fore/Aft - XLT Gold and Top End Force Only

Mounting Bolt

and Locknut

Seat Rails

Back Clamp

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

Nessun commento

Invacare Force Manuale Utente Pagina 37